High Temperature Resistant Centrifugal Pump Installer
ประเภท
สินค้าใหม่
ข่าวล่าสุด
ihf-d เทฟลอนเรียงรายไปด้วยปั๊มแรงเหวี่ยงเชื่อมต่อโดยตรง

ihf-d เทฟลอนเรียงรายไปด้วยปั๊มแรงเหวี่ยงเชื่อมต่อโดยตรง

ihf-d เครื่องสูบแบบแรงเหวี่ยงที่เรียงรายด้วยฟลูออรีนเป็นผลิตภัณฑ์ที่พัฒนาขึ้นของเครื่องสูบน้ำหอยโข่งที่เรียงรายด้วยฟลูออรีนของ ihf สิ่งที่ทนต่อกรดได้ม

ZX stainless steel self-priming horizontal acid-resistant and alkali-resistant centrifugal pump.

2020/05/09

Application of stainless steel self-priming centrifugal pump.
ZX self-priming pump is a horizontal self-priming centrifugal pump suitable for urban environmental protection, construction, fire fighting, chemical industry, pharmaceutical, electric power, electroplating, petroleum, mining, equipment cooling, oil tanker unloading and so on.
Characteristics of stainless steel self-priming centrifugal pump:

ZX self-priming centrifugal pump has the advantages of compact structure, convenient operation, smooth operation, easy maintenance, high efficiency and long service life.


Failure causes of stainless steel self-priming centrifugal pump:
1. ZX self-priming pump does not produce water.
The main results are as follows: 1. There is no liquid storage or insufficient liquid storage in the pump cover.
2. Air leakage in the suction pipe.
3. The rotational speed is too low.
4. The suction distance is too high or the suction line is too long.
5. The leakage of mechanical seal is too large.
6. The gas in the suction line cannot be discharged from the outlet.

2. ZX self-priming pump has a large noise and vibration.
1. The soles of the feet are unstable.
2. Bending of pump shaft.
3. Cavitation phenomenon.
4. Serious bearing wear.
5. There are sundries in the inlet pipeline.
6. The spindle of pump is different from that of electric motor.

Third, the method of self-suction and discharge of stainless steel:
1. Add enough liquid to store liquid.
2. Check and eliminate the phenomenon of air leakage.
3. Adjust the report.
4. Reduce the suction distance or shorten the suction line.
5. Repair or swap.
6. Make it excluded.
7. Reinforcement.
8. Replace or correct.
9. Adjust the working conditions.
10. Replace.
11. Get rid of sundries.
12. Adjust coaxiality


   

ทีมงานมืออาชีพให้บริการ !